Icom IC-F9511T User Manual

2
Push and hold [Clock] for 1 sec to enter the time
Basic Operation
• Time
-
out timer
After continuous transmission for the pre-
programmed time period, the time-out timer is
activated, causing the transceiver to stop
transmitting.
• Penalty timer
Once the time
-
out timer is activated
,
transmission is
2
Push and hold [Clock] for 1 sec to enter the time
and date setting mode.
• The time indication format, “24HR” or “12HR”
blinks.
e
P h [Cl k] t l t th d i d it t b
,
further inhibited for a period determined by the
penalty timer.
Clock function
The transceiver indicates the current time and date
when [Clock] is pushed. And you can change the
indication format and time/date settings.
e
P
us
h [Cl
oc
k] t
o
se
l
ec
t th
e
d
es
i
re
d it
em
t
o
b
e
changed.
fPush [CH Up] or [CH Down], or rotate
[CH Up/Down]* to set the selected item.
*Simple model only
 When you use the transceiver for the first
 time, or after the transceiver has not been
 used for a long time, make sure to check
 the date and time indication after turning
 the power ON. If the time and date are not
 correct, reset them.
gPush [Clock] to set.
• The next item blinks.
h
Repeat steps
e
to
g
to set items
Time and date indication
cPush [Clock] to indicate the current time and
date on the LCD.
• When the indication format is set to
12- hour, “AM” or “PM” is indicated.
• The LCD indication returns to the stand-by
mode after 30 sec has passed with no
operation.
h
Repeat steps
e
to
g
to set items
.
iAfter setting, push and hold [Clock] for 1 sec to
program.
• Return to the time and date setting mode.
jPush [Clock] to return to the stand-by mode.
Wake up function
The wake up function allows the transceiver to be
operation.
Date
The time indication format (12-hour/24-hour)
Time
automatically turned ON according to the wake up
time setting.
cPush and hold [Clock] for 1 sec to enter the
clock set mode.
• “WAKE UP” is indicated.
dPush [Clock] again to return to the stand-by
mode.
Time and date settings
cPush [Clock] to indicate the current time and
date on the LCD.
Date Indication ( Y: Year M:Month D: Date )
dPush [CH Up] or [CH Down], or rotate [CH
Up/Down]* to turn the wake up function ON.
ePush [Clock] to set, and select “WAKE UP TIME.”
39
fPush [CH Up] or [CH Down], or rotate [CH
Up/Down]* to enter the wake up time edit mode.
• The ‘hour’ data blinks.

Icom IC-F9511T Specifications

General

Brand	Icom
Model	IC-F9511T
Category	Transceiver
Language	English