We recommend that you should read out all the transceiver's data before start entering/editing parameters
even when the transceiver is factory fresh.
1Double-click the desired cell in the contents list screen directory, or right-click the cell to display the
edit menu. Then click [Edit... Enter] to select and change the setting depending on the item.
2Click [Help] to display the help screen for the item.
The window shows up,
explaining how to set up RX / TX.
64
NOTE: The above instructions are for reference only.
Please refer to the HELP file of the cloning software when you don’t understand the function or setting
meaning.
To Next Page
Loading...
Need help?
General
