Set the TX to make a call to listen to the targeted
Set the TX to make a call to listen to the targeted
radio's audio frequency without requiring any
action from the targeted radio user.
¾Phone Number List
Make a list for easy recognition of the phone
number.
¾Option
Optional functions are selectable in Individual,
Talkgroup, Config, Call option, and encryption.
¾Expert
Set P25 Parameters, Lockout, and scan extension
time.
Set the individual ID with hexadecimal or decimal
format and enter the ID name.
¾Talk-group
Set the talk-group ID with hexadecimal or decimal
and enter the ID name.
Trunking
Trunking enables further effective channel
management by sharing a minimum of channels
with a large number of users. Set in System
Registration, Hunt List, Roaming List,
and CH ID List. Please see 4-2-3 APCO P25 Clone
Soft Setting for details.
Set the Rx and Tx status.
¾Short message
Enter up to a 12-character message that will be
displayed at transmission and reception of a short
message. Ten messages are available.
OTAR
Reke ing) is the common name
¾Page
Page call is designed to notify the targeted radio
user who may be away from his/her radio or in
noisy environment with alert and indication. Select
‘enable’ if required.
¾Radio Check
Radio check call is desi
for the method of changing encryption keys in a
two-way radio system over the radio channel (“over
the air”). The keys can be changed over the IP
network (SNDCP setting is required).
whether the targeted station is turned on, within
the communication range and on channel without
requiring any action to the targeted radio user. This
call causes a targeted radio to send an
acknowledgment automatically.
Select ‘enable’ if required.
DTMF
¾DTMF Autodial
Enter the DTMF Code and Text.
66
The radio inhibit (stun or kill) calls/or/un-inhibit
(revive) cause the targeted radio to automatically
send an acknowledgment and to be
unusable/or/usable.
To Next Page
Loading...
Need help?
General
