Icom IC-M410BB - Page 17

4
2
PANEL DESCRIPTION
2
SOFTWARE KEYS (p. 5)
Software key functions are displayed.
TIME ZONE
The current time is displayed when valid
GPS data is received, or the time has
been manually entered.
• “NO TIME” is Displayed when valid GPS
data is not received or time has not been
manually entered.
• “??” blinks every 2 seconds instead of the
time when the GPS current time is invalid.
L After 23.5 hours has passed, “NO TIME”
will be displayed.
• “??” blinks every 2 seconds instead of
thetimeafter4hourshavepassedsince
you manually entered the time.
• “LOCAL”isdisplayedwhentheo󰀨set
time is set.
• “MNL” is displayed when the time was
manually entered.
POSITION
The current position is displayed when
valid GPS data is received, or the
position has been manually entered.
• “NO POSITION” is displayed when valid
GPS data is not received or your position
has not been manually entered.
• “??” blinks every 2 seconds instead of your
position when the GPS position is invalid.
L The last position is held for only 23.5
hours. After that, “NO POSITION” will
be displayed.
• “??” blinks every 2 seconds instead of
thepositionafter4hourshavepassed
since you manually entered your position.
L The manually entered position is
held for only 23.5 hours. After that,
“NO POSITION” will be displayed.
SCAN INDICATOR (p.14~16)
• “SCAN” is displayed during a Normal
scan.
• “SCAN 16” is displayed during a Priority
scan.
• “DUAL 16” is displayed during Dualwatch.
• “TRI 16” is displayed during Tri-Watch.
ATTENUATOR INDICATOR (p. 79)
(For only the USA version)
Displayed when the Attenuator function
is turned ON.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com