29
7
DIGITAL SELECTIVE CALLING (DSC)
D Sending a Position Request call/Polling Request call*
(* For only the USA version)
You can send a Position Request call or Polling request call to a station, depending on
the presetting.
•
•
communication area, or not.
Example: Sending a Position Request call
1. Push
.
• The “COMPOSE OTHER” screen is displayed.
L You can also display the screen by selecting
the “Compose Other” item on the Menu
screen.
2. Select “Type,” and then push [ENT] or [DIAL].
3. Select “Position Request,” and then push
[ENT] or [DIAL].
L When you send a Polling Request call, select “Polling Request.”
• Returns to the previous screen.
4. Select “Address,” and then push [ENT] or
[DIAL].
5. Select a target to send a Position Request
call to, and then push [ENT] or [DIAL].
L You can also select “Manual Input” to
manually enter the target ID.
6. Push to send the Position Request
call.
• Position Request call is sent, and then “Waiting
for ACK” is displayed.
L If Channel 70 is busy, the transceiver stands
by until the channel becomes clear.
7.
• An alarm sounds.
• The screen on the right is displayed.
8. Push to turn OFF the alarm.
9. Push
.
• The received information is displayed.
10.
position.
11. Push
, and then to return to the operating screen.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
To Next Page
Loading...
