Icom IC-M410BB - Page 43

30
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
1. After a Position Request is being received,
push
to turn OFF the alarm.
• The received call’s information is displayed.
2. 
operation.

Ignores the call and returns to the
operating screen.
• The call is saved in the DSC Log.
• “ ” blinks continuously until
you display the call message.

Holds the RX call task, and
returns to the Main screen.

( Able to
Comply)


• The call is saved in the DSC Log.
• 
information, and then returns to
the operating screen by pushing
, and then .

(Unable to
Comply)

“Unable to Comply.”
• The call is saved in the DSC Log.
• 
information, and then returns to
the operating screen by pushing
, and then .
D Sending a Position Reply call


calling station. (p. 44)
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com