Icom IC-M410BB - Page 71

58
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
AIS FUNCTION
8
■ Setting a Friend
You can set up to 100 AIS targets as a Friend in the Friends List.
An alarm sounds when a Friend is detected, depending on the setting. (p. 62)
D Entering an ID
There are 3 ways of setting a Friend, using
the Friends List, selecting in the AIS list, or
selecting on the plotter display.
Using the Friends List:
1. Open the “FRIENDS LIST” screen.
[MENU] > Settings > AIS > Friends >
Friends List
• “No ID” is displayed when there is no
Friend.
2. Push to display the Friend ID
window.
3. Enter an ID.
TIP:
• Select a number using [◄] and [►].
• Push [ENT], or [DIAL] to enter the
selected number.
• Select “←” or “→” on the screen, or
rotate [DIAL] to move the cursor.
4. Push
to save the edited ID.
• The target is added to the Friends List.
Selecting in the Target List or Danger List:
1. Open a “Target List” or a “Danger List”.
[MENU] > AIS > Target List or
Danger List
2. Push [▲] or [▼], or rotate [DIAL] to
select an AIS target.
3. Push
to display the details
screen.
• The “DETAILS” screen is displayed.
4. Push .
• “Register as a Friend,” is displayed.
• is displayed.
Selecting on the plotter display:
1. Open the plotter screen. (p. 53)
2. Push
or to select an AIS
target.
3. Push
to display the details
screen.
• The “DETAILS” screen is displayed.
4. Push .
• The target is added to the Friends List.
• A friend target is displayed with
(black
triangle) on the plotter screen.
D Editing an ID
1. Open the “FRIENDS LIST” screen.
[MENU] > Settings > AIS > Friends >
Friends List
2. Push [▲] or [▼], or rotate [DIAL] to
select an ID.
3. Push
.
L See step 3 in “Using the Friends List,”
as described to the left.
D Deleting an ID
1. Open the “FRIENDS LIST” screen.
[MENU] > Settings > AIS > Friends >
Friends List
2. Push [▲] or [▼], or rotate [DIAL] to
select an ID.
3. Push
.
• “Delete the ID. Are you sure?” is
displayed.
4. Push .
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com