59
8
AIS FUNCTION
■ About the Detail screen
The Detail screen displays the information about the selected AIS target. The contents
may dier, depending on the selected target.
L When a Danger target is selected, is displayed.(p. 57)
L When a Friend target is selected,
is displayed. (p. 57)
Class A and SAR vessel
AIS class
MMSI code
Ship name
Country name
Call sign
Vendor ID
IMO number
CPA (Closest Point of Approach)
TCPA (Time to CPA)
Position (Latitude, Longitude)
SOG (Speed Over Ground)
COG (Course Over Ground)
HDG (Heading)
PA (Position Accuracy (H: High, L: Low))
Range
Bearing
ROT (Rate Of Turn)
Bow to antenna distance
Stern to antenna distance
Port side to antenna distance
Starboard side to antenna distance
Length
Beam
Draught
Type of ship
NAV Status
Destination
Estimated time of arrival
Elapsed time
Class B
AIS class
MMSI code
Ship name
Country name
Call sign
Vendor ID
CPA (Closest Point of Approach)
TCPA (Time to CPA)
Position (Latitude, Longitude)
SOG (Speed Over Ground)
COG (Course Over Ground)
HDG (Heading)
z Push the Software Key below for your next operation.
:
Displays the “COMPOSE OTHER”
screen to send an Individual call. (p.
23)
:
Sets the selected target as a Friend.
(p. 58)
L A beep sounds and a popup screen is
displayed when the memory is full.
:
Displays the Individual ID entry screen.
(p. 17)
L A beep sounds and a popup screen is
displayed when the memory is full, or
the ID has been already added.
D Contents list
NOTE: The contents may dier, depending on the received data.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
To Next Page
Loading...
