To Next PageTo Next Page
Need help?Do you have a question about the Icom IC-T22A and is the answer not in the manual?
General| Frequency Range | 144-148 MHz |
|---|---|
| Modulation | FM |
| Power Output | 5W (High), 1W (Low) |
| RF Power Output | 5W (High), 1W (Low) |
| Receiver Sensitivity | 0.16 μV for 12 dB SINAD |
| Voltage | 7.4V DC |
Outlines essential safety precautions and warnings to prevent hazards during transceiver operation.
Covers selecting operating modes (VFO, Memory) and setting desired frequencies.
Core steps for receiving signals, adjusting volume, and selecting transmit power levels.
Guides on using repeaters, setting subaudible tones, and managing frequency offsets.
Comprehensive guide to programming, naming, and transferring data for memory and call channels.
Procedures for storing, transmitting DTMF codes, and adjusting their transmission speed.
Details on various scan types, skip functions, and scan resume conditions.
How to monitor specific channels and utilize the transceiver's pager capabilities.
Steps for setting ID codes, group codes, and using code squelch for selective communication.
Instructions for sending and receiving alphanumeric messages with the transceiver.
Covers subaudible tones, tone squelch, tone scan, and pocket beep alert functions.
A comprehensive guide to diagnosing and resolving common transceiver problems based on symptoms and causes.
