To Next PageTo Next Page
Need help?Do you have a question about the Icom IC-T10 and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-T10 |
| Category | Transceiver |
| Language | English |
Explains how to use the manuals to understand and operate the transceiver.
Lists registered and unregistered trademarks of Icom and other companies.
Details battery life, icons, and precautions for swelled battery packs.
Instructions on charging the battery pack using the BC-213 rapid charger.
How to use an external power source with the transceiver.
Technical specifications for the BC-213 charger and BP-280 battery pack.
Explains how to quickly select saved memory channels in Memory mode.
Lists the types of information that can be entered into memory channels.
How to select memory channels using the DIAL or Ten-Keypad.
How to select Call channels for quick recall of operating frequencies.
Step-by-step guide to entering frequencies into memory channels.
How to copy memory channel data to the VFO mode for operation.
Instructions on how to assign a name (up to 6 characters) to a memory channel.
Overview of different scanning types like VFO scan and Memory scan.
Details on scan operations, squelch, tuning step, and signal reception.
How to perform scans within specified frequency ranges in VFO mode.
How to scan preregistered memory channels.
How to connect to and use repeaters, including signal checking and tone bursts.
How to set frequency offsets and directions for duplex communication.
Explains how to set infrequently changed values or function settings.
Details various settable items like Tone/DTCS, Duplex, and Tuning Step.
Covers initial settings such as Beep level, Auto power OFF, and Lockout.
How to save and transmit DTMF codes using memory channels.
Methods for transmitting DTMF codes manually or from memory.
How to use tone squelch to filter signals based on subaudible tones.
How to use DTCS code squelch for selective communication.
How to detect subaudible tones and DTCS codes in received signals.
How to monitor NOAA weather broadcasts and use the alert function.
How to enable and adjust the Voice Operated eXchange (VOX) function.
How to control the transceiver using a remote control unit via the SP jack.
Instructions for copying transceiver settings between units or to a PC.
How to perform a Partial or All Reset to restore factory defaults.
Details various types of microphones for the transceiver.
Information about the BP-280 battery pack.
Lists available chargers, adapters, and DC power cables.
Includes accessories like charger brackets, belt clips, and programming software.
Instructions for removing and installing the jack cover.
How to attach and use optional speaker microphones.
Diagrams and descriptions of the transceiver's panels.
