Icom IC-T10 - Weather Channel Operation

6
OTHER FUNCTIONS
6-8
Weather channel operation (For only the USA version)
D Selecting a Weather channel
1. Repeatedly push [V/M/C] to select the Weather
Channel mode.
2. Rotate [DIAL] to select a weather channel.
• Displays the selected weather channel number.
There are ten weather channels for monitoring the National Oceanographic and Atmospheric Administration
(NOAA) weather broadcasts.
D Using the Weather Alert function
NOAA broadcast stations transmit weather alert tones
before important weather announcements.

selected weather channel is monitored every 5
seconds for an announcement.
Step 1. Turning ON the Weather Alert function
1. Push [SET] to enter the Set mode.
• A Set mode item is displayed.
2. Repeatedly push [SET] to select “WX.ALt.”
3. Rotate [DIAL] to select “On.”
4. Push [V/M/C] to exit the Set mode.
Step 2. Using the Weather Alert function
1. Repeatedly push [V/M/C] to select the Weather
Channel mode.
• “WX” is displayed.
2. Rotate [DIAL] to select a weather channel.
• Displays the selected weather channel number.
• 
“ALT” and “WX” alternately display.