Icom IC-T22E - Accessory Attachment Guide

BATTERY PACKS AND ACCESSORIES 2
@ Accessory attachment
© Antenna
Insert the supplied antenna into the an-
tenna connector and rotate the antenna
as shown in the diagram below.
Keep the jack cover attached when
jacks are not in use to avoid bad con-
tacts.
Y, CAUTION:
Y Transmitting
Z without the
© Belt clip © Handstrap
Remove screws, then attach the belt clip Attach the handstrap as shown in the di-
using the same screws. Conveniently at- agram below. Facilitates carrying.
taches to your belt.