Icom IC-U200 - HORN-HONK FUNCTION

HORN-HONK FUNCTION When a signal with a correct code number is decoded, the transceiver
alerts the operator through a signalling device such as an automobile
horn. This is useful when the operator is away from the operating
position.
The optional UT-32 2-TONE DECODER UNIT or UT-33 2805Hz
TONE DECODER UNIT must be installed to activate the
HORN-HONK FUNCTION.
e The optional UX-11 HORN-HONK DRIVER UNIT is recom-
mended for connecting the transceiver to the signalling device.
Consult your nearest |COM Dealer or Service Center for installation
details for the HORN-HONK FUNCTION.