Icom IC-U200 User Manual

- The transceiver is ready to operate from any regulated 13.8V DC,
POWER REQUIREMENTS 7A negative ground source. A 12V, negative ground system works
well as a power source.
e
CONNECTIONS
PL-259
connector
Goes
To
antenna
Supplied
DC
power
cable
A
24V
battery
cannot
be
connected
to
the
transceiver
directly.
Ask
your
ICOM
Dealer
or
Service
Center
for
installation
informa-
tion
if
your vehicle
has
a
24V
battery
installed.
SP-5 Optional speaker _
ANTENNA The single, most important item that influences the performance of
any communication system is the antenna. A high-quality, 5022 5/8
wavelength antenna is recommended for mobile applications.

Icom IC-U200 Specifications

General

Brand	Icom
Model	IC-U200
Category	Transceiver
Language	English