To Next PageTo Next PageWhat to do if the ICON Health & Fitness Treadmill console displays do not function properly?
If the displays of the console do not boot up properly, or if the console freezes and does not respond, reset the console to the factory default settings. You can also use a bent paper clip to press and hold the reset button inside the opening, while a second person presses the power switch into the on position.
How to center the walking belt on an ICON Health & Fitness PRO-FORM PERFORMANCE 800i?
If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
Why does the ICON Health & Fitness PRO-FORM PERFORMANCE 800i walking belt slow down when I walk on it?
If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and unplug the power cord. Using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. If you suspect that the walking belt needs more lubricant, please check the front cover of this manual.
How to fix power not turning on ICON Health & Fitness Treadmill?
First, make sure that the power cord is plugged into a surge suppressor and that the surge suppressor is plugged into a properly grounded outlet. After the power cord has been plugged in, make sure that the key is inserted into the console. Also, check the power switch located on the treadmill frame near the power cord. If the switch protrudes, it has tripped. To reset it, wait for five minutes and then press the switch back in.
What to do if ICON Health & Fitness PRO-FORM PERFORMANCE 800i Treadmill walking belt slips?
First, remove the key and unplug the power cord. Then, using the hex key, turn both idler roller screws clockwise, 1/4 of a turn.
Why does my ICON Health & Fitness Treadmill power turn off during use?
Check the power switch. If the switch has tripped, wait for five minutes and then press the switch back in. Also, ensure that the power cord is plugged in. If it is, unplug it, wait for five minutes, and then plug it back in. You can also try removing the key from the console and then reinserting it.
General| Brand | ICON Health & Fitness |
|---|---|
| Model | PRO-FORM PERFORMANCE 800i |
| Category | Treadmill |
| Language | English |
Instructions on connecting the treadmill's power cord safely and properly, including surge suppressor use.
Explains how to interact with the treadmill's touch screen interface and keyboard.
Guide for performing console firmware updates and maintenance checks.
Instructions for unfolding the treadmill from a folded position to a ready-to-use state.
Troubleshooting common causes for the walking belt losing speed during use.
