Icon Q Boundless E1 - Charging Your Device; Pairing Devices

7
B. CHARGING YOUR DEVICE
The Boundless E1 oers convenient charging via a micro
USB port. For best performance, you must charge the
product fully before using it for the rst time. When the
battery is low, the indicator light will ash red.
Steps:
1. Find the USB cable included with this product.
2. Connect the micro connector to the earphones’ micro
USB port.
3. Connect the other end to your computer’s USB port. Make
sure your computer is turned on. (You may also connect
the cable to a USB power adapter for charging with an
electrical outlet. )
IMPORTANT: Use only a USB power adapter with a rated
output that matches the input voltage of your device.
4. When charging, the status indicator will light red.
5. When fully charged, the indicator light will turn o.
C. PAIRING DEVICES
To use your Bluetooth® earphones, you must rst pair it
with a Bluetooth enabled device, such as a smartphone or a
computer. Once paired, your earphones will automatically
recognize and connect to the Bluetooth device in the future.