9
2. Turn on your device and ensure its Bluetooth and NFC
functions are active. You will nd these options on most
devices under Settings or Options.
3. Briey hold your device against the NFC sensor found
on the back of the earphone controls. Accept the
request when your device asks if you want to pair with
the Boundless E1 earphones.
4. Your earphones will say that they are paired and the
indicator light will ash blue intermittently. Your Blue-
tooth enabled device has been successfully connected.
E. MULTI-POINT FUNCTION
The multi-point function allows you to pair the earphones
to two devices at once.
Steps:
1. Follow the instructions in Part IV, Section C above to
pair your earphones with Phone 1.
2. Disable Bluetooth on Phone 1 and turn o the earphones.
3. Follow the instructions in Part IV, Section C above to
pair your earphones with Phone 2.
4. Re-enable Bluetooth on Phone 1. Find the Boundless E1
from the list of paired devices and select it.
Phone 1 and Phone 2 are now paired and connected to
the earphones.
To Next Page
Loading...