ICON AIRFORM Series User Manual

ICON® IS A REGISTERED TRADEMARK. ALL RIGHTS RESERVED. COPYRIGHT© 2018 LEMANS CORPORATION.
REPLACEMENT PARTS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PRINTED IN VIETNAM.
J-TECH CORP. Made in Vietnam ECE/DOT/PSC
OWNERS INSTRUCTION MANUAL
SAFETY WARNING: FOR YOUR SAFETY, IT IS IMPORTANT THAT YOU COMPLETELY READ THIS OWNER’S MANUAL AND ALL
WARNING LABELS ON AND INSIDE THE HELMET.
The instructions in this manual are designed to help you select the right helmet, wear it properly, take care of it and know when
to replace it. Failure to follow these instructions may increase your risk of serious injury or death in an accident. In order to get
the most protection possible from your helmet, you should always do the following – Wear your helmet when you ride, Handle
your helmet carefully to avoid accidental damage and ride safe. Do not take risks because you are wearing a helmet.
DISTRIBUTED IN THE U.S. BY:
DISTRIBUÉ AUX U.S.A. PAR:
VERTRIEBEN IN DEN U.S.A. DURCH:
DISTRIBUITO NEGLI USA DA:
DISTRIBUIDO EN LOS EE.UU. POR:
DISTRIBUTEUR IN DE VS:
DISTRIBUÍDO NOS E.U.A. POR:
РАСПРОСТРАНЯЮТСЯ В США:
アメリカ:
PARTS UNLIMITED
®
DISTRIBUTED IN EUROPE BY:
DISTRIBUÉ EN EUROPE PAR:
VERTRIEBEN IN EUROPA DURCH:
DISTRIBUITO IN EUROPA DA:
DISTRIBUIDO EN EUROPA POR:
DISTRIBUTEUR IN EUROPA:
DISTRIBUÍDO NA EUROPA POR:
РАСПРОСТРАНЯЮТСЯ В ЕВРОПЕ:
ヨーロッパ:
PARTS EUROPE GMBH
CONRAD-ROENTGEN-STR. 2., 54332
WASSERLIESCH, GERMANY
DISTRIBUTED IN CANADA BY:
DISTRIBUÉ AU CANADA PAR:
VERTRIEBEN IN KANADA DURCH:
DISTRIBUITO IN CANADA DA:
DISTRIBUIDO EN CANADÁ POR:
DISTRIBUTEUR IN CANADA:
DISTRIBUÍDO NO CANADÁ POR:
РАСПРОСТРАНЯЮТСЯ В КАНАДЕ:
カナダ:
PARTS CANADA
®
NOT TO BE REMOVED EXCEPT BY CONSUMER

ICON AIRFORM Series Specifications

General

Shell Material	Polycarbonate
Safety Standards	DOT and ECE certified
Fit	Intermediate Oval
Features	Removable Chin Curtain
Visor	Clear, anti-fog, and UV-protective shield

Summary

Helmet Construction and Components

Construction Standards

Details the injection-molded polycarbonate PC-ABS shell and dual-density EPS liners for impact absorption.

Shell and EPS Design

Details the polycarbonate shell and dual-density EPS liners for impact absorption and airflow.

Selecting and Fitting Your Helmet

Choosing the Correct Helmet Size

Guide to measuring head circumference and using the sizing chart to select the right helmet size.

Proper Fitting Instructions

Steps to ensure the helmet fits snugly and securely, checking for proper positioning and retention.

Helmet Usage and Safety

Chinstrap Fastening

Instructions for securely fastening the chinstrap using the D-ring system for proper retention.

Correct Helmet Usage Guidelines

Safety warnings and guidelines for wearing the helmet correctly, avoiding modifications or damage.

Pre-Ride Helmet Inspection

Check shield, ratchet, and overall helmet condition for damage or wear before each ride.

Face Shields and Components

ICON OPTICS™ and DropShield™ Features

Overview of the clear ICON OPTICS™ shield and the integrated tinted DropShield™.

ICON OPTICS™ Shield Removal and Installation

Step-by-step guide for removing and installing the ICON OPTICS™ face shield.

DropShield™ Removal and Installation

Procedure for removing and installing the integrated DropShield™.

Interior Comfort and Ventilation

Comfort Liner Maintenance

Instructions for removing and reinstalling the helmet's comfort liner and cheekpads for cleaning.

Venting System Operation

How to activate and control the helmet's forehead and rear vents for airflow.

Care, Storage, and Advisories

Helmet Care and Cleaning Procedures

Guidelines for cleaning the helmet interior, exterior, and shield to maintain condition.

Proper Helmet Storage

Recommendations for storing the helmet safely to protect it from damage and sunlight.

Important Advisories and Warnings

Covers impact rules, obsolescence, hearing, replacement, and owner liability.