Do you have a question about the ICON VARIANT PRO and is the answer not in the manual?
Standards | DOT, ECE 22.05 |
---|---|
Shell Material | Fiberglass/Dyneema/Carbon Fiber |
Weight | Approximately 3.5 lbs (1.59 kg) |
Liner | Hydradry moisture-wicking liner |
Ventilation | Multiple air intake and exhaust ports |
Additional Features | Removable chin curtain, integrated sun visor |
Instructions on how to measure head circumference to determine the correct helmet size using a tape measure.
A table correlating head measurements (inches/cm) to hat sizes for different helmet shell sizes.
Steps to physically try on and check the helmet's fit, ensuring it sits correctly and doesn't move excessively.
Detailed instructions on how to correctly fasten and release the helmet's D-ring chinstrap system.
Step-by-step guide for removing and installing the helmet's visor.
Detailed instructions for removing and installing the helmet's main face shield.
Important advisories for helmet users, including impact, obsolescence, and disposal recommendations.
Emphasizes that helmets must be replaced after any impact, visible or not.