SAFETY WARNING: Riding a motorcycle is a dangerous activity. No helmet
can protect a wearer against all possible impacts. When riding, always wear
a helmet, eye protection, protective clothing, gloves and boots. There is no
assurance that serious injury or death can be avoided even if you wear the
helmet shown in this manual. Take all precautions to avoid every risk when riding
a motorcycle. This helmet is not meant for use as a fire retardant product and
does not contain any fire retardant materials. Please ensure that your ICON
®
products fit properly. Improperly fitting products can impair your ability to control
your motorcycle.
02
CONTENTS
01
TABLE OF CONTENTS
CONSTRUCTION
03
SHELL & EPS
04
CHOOSING THE CORRECT HELMET SIZE
05
PROPER FITTING
06
CHINSTRAP
07
USING YOUR HELMET CORRECTLY
08
INSPECTING YOUR HELMET BEFORE EVERY USE
08
VARIANT PRO
TM
VISOR
09
VARIANT PRO
TM
SHIELD
10
HYDRADRY
TM
COMFORT LINER
11
VENTING SYSTEM
13
CARE AND CLEANING
15
ADVISORY
16
USE INSTRUCTIONS AND WARNINGS: Before using this helmet, be sure to
read this instruction manual and retain it after reading. It contains valuable
information that will help you maximize the performance and life of the helmet.
MOBILITY liberated
For over a decade the Variant
TM
helmet has defined
aggressive street riding. Now, with a refined fit, improved
function, and lighter weight, we introduce the much
anticipated Variant Pro
TM
. The wind tunnel refined shell is
designed to reduce drag and buffeting, couple that with
a dual density EPS core which provides critical energy
management while maintaining a slim profile.
The Variant’s Pro unique toolless shield change system is
as effortless as it is intuitive. The two stage process allows
you to swap shields in a matter of seconds, removing all
guesswork, and gets you back riding where you belong.
Once there, the shield’s Fog-Free coating comes into play,
keeping your field of vision clear on rainy or cold riding
days.
Internally, the traditional three-piece liner has been
upgraded to a five-piece liner, providing a greater amount
of fitment combinations for each unique head shape.
Crown, lateral, fore and aft padding components allow
for 27 fitment combinations in a single shell. The Vartiant
Pro’s extensive venting system works at all speeds, providing
necessary airflow to the helmet interior. The airflow works in
conjunction with the sweat wicking Hydradry
TM
liner to effectively
reduce heat build up.
To Next Page
Loading...
Need help?
General
