Need help?Do you have a question about the ICON Neuron 5 G2 and is the answer not in the manual?
General| Brand | ICON |
|---|---|
| Backlight | RGB |
| Hot-swappable | Yes |
| N-key Rollover | Yes |
| Type | Mechanical |
| Connectivity | Wired |
| Switch Type | Gateron |
| Keycaps | PBT |
| Actuation Point | 2mm |
| Total Travel | 4mm |
| Polling Rate | 1000Hz |
Lists the contents included with the Neuron G2 controller keyboard.
Describes the velocity-sensitive piano-action key switches on the front panel.
Explains the function of the modulation and pitch bend joystick on the front panel.
Details the control buttons used to operate Neuron's features.
Highlights key switches on the keybed used for Neuron control.
Describes the four rotary encoder knobs for DAW and instrument control.
Explains the programmable fader for adjusting MIDI parameters like volume.
Button to access and control functions on the key switches.
Controls for setting and activating the first keybed zone.
Controls for setting and activating the second keybed zone.
Button to change the keyboard's sound patch.
Function to mute the Neuron G2.
Function to switch between layers for the knobs.
1/4" input for connecting an expression pedal.
1/4" jack for connecting a momentary footswitch or sustain pedal.
Terminal for connecting to external synthesizers or sound modules.
Step-by-step guide to connect the Neuron G2 to a computer via USB.
Select Mackie Control, HUI, or User Defined modes for MIDI function assignment.
Manage settings for the 20 available memory slots on the Neuron.
Select available velocity curves for the keyboard.
Set the global MIDI channel for the keybed.
Switch between the two layers for the control knobs.
Assign desired MIDI functions to the control knobs.
Assign desired MIDI functions to the fader.
Assign desired MIDI functions to the MMC button.
Save current settings for the Neuron G2 as a .neuron file.
Load a previously saved .neuron setting file.
Upload iMap software settings to the Neuron G2 via USB.
Open a window to select MIDI input/output devices.
Access the firmware upgrade window for the Neuron G2.
Table detailing functions for Mackie Control mode in Layer 1 and Layer 2.
Table detailing functions for Mackie HUI mode in Layer 1 and Layer 2.
Contains tables for General MIDI Instruments and Drum assignments.
Lists General MIDI Controller numbers and their corresponding functions.
Table indicating which controllers operate Neuron features.
Provides a conversion chart between hexadecimal and decimal values.
Defines key terms and concepts related to operating the Neuron G2.
To Next Page
