Need help?Do you have a question about the ICON Neuron 3 G2 and is the answer not in the manual?
General| Brand | ICON |
|---|---|
| Connectivity | USB |
| Backlight | RGB |
| N-key Rollover | Yes |
| Anti-ghosting | Yes |
| Type | Keyboard |
| Keycaps | ABS |
| Interface | USB |
| Actuation Force | 45g |
| Actuation Point | 2mm |
| Total Travel | 4mm |
Adhere to all warnings on the appliance and in the manual.
Adhere to all instructions provided in the manual.
Do not expose the unit to rain or spilled liquids.
Do not block ventilation openings; install per manufacturer instructions.
Do not defeat the purpose of polarized or grounding plugs.
Prevent the power cord from being walked on or damaged.
Do not touch exposed wiring during operation to avoid shock.
Unplug during lightning storms or long periods of non-use.
Servicing is required for damage or abnormal operation.
Joystick for adjusting modulation and pitch bend effects.
Buttons to control, set, and activate Neuron features.
Knobs for controlling DAW parameters like pan, aux sends, and EQ.
Fader for adjusting MIDI parameters like volume.
Connect the Neuron G2 to your computer using the USB port.
Configure Mackie Control or HUI mode for your DAW.
Set up your DAW based on the iMap mode selected.
Step-by-step guide to launch iMap software on Mac OS X.
Select control modes: Mackie Control, HUI, or User Defined.
Configure and transfer settings for the 20 available memory slots.
Assign MIDI functions to control knobs in User Defined mode.
Assign MIDI functions to the fader in User Defined mode.
Assign MIDI functions to MMC buttons in User Defined mode.
Upload iMap software settings to the Neuron G2 via USB.
Access the firmware upgrade window for Neuron G2.
Upload the firmware and wait for completion.
To Next Page
