5. DISPLAY RELEASE rELS.0F Off (default)
rELS.0n On
The standard factory setting is Display Release OFF, which in HOLD mode keeps the last weighing locked
on the display until the next weighing.
For Display Release ON, when the weighed animal is removed from the scale, the weight will not remain
locked on the display.
To change the Display Release setting, press ZERO.
To save this setting and exit Set-Up, press WEIGH.
6. WEIGHT UNITS (all scales) HG kilograms (default)
Lb pounds
The standard factory setting is kg. If pounds are selected, the scale calibration is changed accordingly
and printouts will show LB.
To change the Weight Units setting, press ZERO.
To save this setting and step on to the next one, press WEIGH.
7. LANGUAGE (all scales) EnGL5H English (default)
E5PAnL Spanish
dEUtSH German
France French
The display messages and printouts are shown in the selected language. There are English, Spanish,
German and French versions of the front panel decal. The language setting should match the decal.
To change the Languag setting, press ZERO.
To save this setting and step on to the next one, press WEIGH.
After the Language setting has been viewed or modified, WEIGH is pressed for the final time. ’SAuEd’
is displayed while the settings are being stored, before returning to the normal weighing mode.
FX21 Manual v5.01 28Feb24 Page 11
To Next Page
Loading...
