USING “ALL GROUPS” (Group = 0)
Selecting ’GrP 0’ allows access to all records in memory, regardless of which groups individual records
are stored in. The user may:
♦ View global statistics. See the STATISTICS section below. Average weight, total weight and the number
of weighings etc. are the totals for all records in memory.
Note: The total number of weighings will show whether the memory capacity of the FX21 will soon be
reached (7238 or 3626 records, depending on version)
♦ Delete all records in memory. See the section CLEARING RECORDS below.
Note: ‘GrP 0’ may not be used for storing records in a weighing session. If an attempt is made to do
so, the message ’no.Stor’ is displayed briefly.
CLEARING RECORDS
To clear all records in the currently selected group:
♦ Ensure that the correct group for deletion is selected, by pressing the keys: *GROUP
♦ Display any statistics function (see DISPLAYING STATISTICS below), then while any of the statistics are
flashing on the display, press DELETE.
♦ The operator is then prompted with the message ’SurE ?’.
♦ Press DELETE again within 2 seconds to confirm. ’dELete’ is displayed if the file has been
cleared. If DELETE is not pressed within 2 seconds, ’no dEL’ is displayed.
STATISTICS
Statistics apply to all records in the currently selected group. In the case of Group 0, statistics apply to all
records in memory, regardless of which groups they are located in.
DISPLAYING STATISTICS
Press to display ’SELECt’.
Press the corresponding number key to select from:
WGT STATS,
AVG SCORE,
DRAFT NO’s,
DRAFT WGTS or
DRAFT TOT.
While the statistics are calculated, ‘bUSY -' is displayed briefly.
For example :
Press
WGT STATS: no. = number of animals weighed is displayed
Press
WGT STATS again: AuG = average weight is displayed.
Press
WGT STATS again: totAL = total weight of animals is displayed.
Press
WGT STATS again to return to the normal weighing mode (’End’ is displayed) OR press any other
statistics key (eg
DRAFT NO’s) to begin displaying a different set of statistics:
DRAFT NO’s: H = number of animals in High Group
C = number of animals in Centre Group
L = number of animals in Low Group
DRAFT WGTS: H = average weight of animals in High Group
C = average weight of animals in Centre Group
L = average weight of animals in Low Group
DRAFT TOT: totAL.H = total weight of animals in High Group
totAL.C = total weight of animals in Centre Group
totAL.L = total weight of animals in Low Group
FX21 Manual v5.01 28Feb24 Page 7
To Next Page
Loading...
