ICP DLC4AV36K1A - User Manual

421 01 9204 00 1/03/13
SERVICE MANUAL
R−410A Ductless Split System
Air Conditioner and Heat Pump
MODELS: DLC4(A/H)−Outdoor, DLF4(A/H)−Indoor
SIZES: 9K, 12K, 18K, 24K, 30K, and 36K
INTRODUCTION
This Service Manual provides the necessary information to
service, repair, and maintain the DLF4(A,H), DLC4(A/H)
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS 1........................
SPECIFICATIONS 2..................................
MODEL / SERIAL NUMBER NOMENCLATURE 16.......
STANDARD FEATURES AND ACCESSORIES 17........
DIMENSIONS 18.....................................
CLEARANCES 22....................................
SYSTEM OPERATING ENVELOPE 23..................
ELECTRICAL DATA 25...............................
CONNECTION DIAGRAMS 26.........................
WIRING DIAGRAMS 27...............................
REFRIGERATION SYSTEM DIAGRAM 36...............
REFRIGERANT LINES 38.............................
SYSTEM EVACUATION AND CHARGING 39............
CONTROL SYSTEM 40...............................
MODES OF OPERATION 44...........................
TROUBLESHOOTING 47.............................
DIAGNOSTIC CHARTS 48............................
MALFUNCTION ANALYSIS 55.........................
APPENDIX 79.......................................
SAFETY CONSIDERATIONS
Installing, starting up, and servicing air−conditioning
equipment can be hazardous due to system pressures,
electrical components, and equipment location (roofs,
elevated structures, etc.).
Only trained, qualified installers and service mechanics
should install, start−up, and service this equipment.
Untrained personnel can perform basic maintenance
functions such as cleaning coils. All other operations should
be performed by trained service personnel.
When working on the equipment, observe precautions in the
literature and on tags, stickers, and labels attached to the
equipment.
Follow all safety codes. Wear safety glasses and work
gloves. Keep quenching cloth and fire extinguisher nearby
when brazing. Use care in handling, rigging, and setting
bulky equipment.
Read these instructions thoroughly and follow all warnings
or cautions included in literature and attached to the unit.
Consult local building codes and National Electrical Code
(NEC) for special requirements. In Canada, refer to current
editions of the Canadian Electrical Code, CSA 22.1.
Recognize safety information. This is the safety−alert
symbol
!
!
. When you see this symbol on the unit and in
instructions or manuals, be alert to the potential for personal
injury.Understand these signal words: DANGER,
WARNING, and CAUTION. These words are used with the
safety−alert symbol. DANGER identifies the most serious
hazards which will result in severe personal injury or death.
WARNING signifies hazards which could result in personal
injury or death. CAUTION is used to identify unsafe
practices which may result in minor personal injury or
product and property damage. NOTE is used to highlight
suggestions which will result in enhanced installation,
reliability, or operation.
!
WARNING
ELECTRICAL SHOCK HAZARD
Failure to follow this warning could result in personal
injury or death.
Before installing, modifying, or servicing system, main
electrical disconnect switch must be in the OFF
position. There may be more than 1 disconnect switch.
Lock out and tag switch with a suitable warning label.
CAUTION
!
EQUIPMENT DAMAGE HAZARD
Failure to follow this caution may result in equipment
damage or improper operation.
Do not bury more than 36 in. (914 mm) of refrigerant
pipe in the ground. If any section of pipe is buried, there
must be a 6 in. (152 mm) vertical rise to the valve
connections on the outdoor units. If more than the
recommended length is buried, refrigerant may migrate
to the cooler buried section during extended periods of
system shutdown. This causes refrigerant slugging and
could possibly damage the compressor at start−up.

Summary

Safety Considerations

Product Specifications and Details

Model and Serial Number Nomenclature

Explanation of model series, type, size, voltage, and serial number structure.

Standard Features and Accessories

Lists standard features and optional accessories included with the unit.

Unit Dimensions and Clearances

Physical dimensions for indoor/outdoor units and required installation clearances.

System Operating Envelopes

Defines operational temperature and humidity ranges for different models.

Electrical Data

Provides electrical specifications including voltage, current, and power ratings.

Wiring, Refrigerant, and System Diagrams

Connection and Wiring Diagrams

Illustrates wiring connections and provides detailed wiring diagrams.

Refrigerant System Diagrams

Visual representation of the refrigerant flow for different models.

System Vacuum and Charge

Procedures for evacuating and charging the refrigerant system.

Operation and Controls

Remote Control and Functions

Describes the functions and operation of the remote control.

Function and Controls

Explains control operations, working modes, and protection functions.

Troubleshooting and Malfunctions

Troubleshooting Precautions

Safety precautions and general checks before performing troubleshooting.

Troubleshooting Error Codes

Lists malfunctions, error codes, and reasons for various unit types.

Malfunction Analysis and Diagnoses

Step-by-step analysis and diagnosis for common and specific unit malfunctions.

Appendices

Supplementary data, including sensor resistance tables.

ICP DLC4AV36K1A Specifications

General

Brand	ICP
Model	DLC4AV36K1A
Category	Air Conditioner
Language	English