ICP EF08B1500A2 User Manual

INSTA LATION
INSTRUCTIONS
Use ONLY factor'
s
.//
/
/
Models
EF08B1500A1, A2
EF12F1900A
EF16J2200A
EF20N2600A
listed electric heaters.
ECTRIC
With
AMF001NHA
Accessory No Heat Kit
FURNACE
SafetyLabeling and SignalWords
Danger, Warning and Caution
The signal words DANGER, WARNING and CAUTION
are used to identify levels of hazard seriousness. The
signal word DANGER is only used on product labels to
signify an immediate hazard. The signal words WARN-
ING and CAUTION will be used on product labels and
throughout this manual and other manuals that may ap-
ply to the product.
DANGER - Immediate hazards which WILL result in se-
vere personal injury or death.
WARNING - Hazards or unsafe practices which
COULD result in severe personal injury or death.
CAUTION - Hazards or unsafe practices which COULD
result in minor personal injury or product or property
damage.
Safety Labeling and Signal Words Coy
General Information / Installation ............ 2
Vertical Installations ........................ 2
Horizontal Installations ..................... 3
Condensate Drain .......................... 5
Refrigerant Orifice and Lines ................ 5
Electrical Wiring ............................ 6
Checks and Maintenance .................... 7
Blower Performance ........................ 8
Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
The signal word CAUTION is used throughout this
manual in the following manner:
CAUTION
Product Labeling
Signal words are used in combination with colors and/or
pictures on product labels.
Printed in U.S.A. 442 01 2201 02
6-99

ICP EF08B1500A2 Specifications

General

Brand	ICP
Model	EF08B1500A2
Category	Furnace
Language	English

Summary

Safety Labeling and Signal Words

Signal Words in Manuals

General Information

Installation Configurations

Upflow Installations

Details installation for upflow airflow configuration.

Downflow Installations

Details installation for downflow airflow configuration.

Horizontal Installations

Covers horizontal airflow installation without a coil.

Non-Ducted Return Air Closet Installation

Filter Installation

Condensate Drain

Special Note For Downflow Installations

Overflow drain connection for downflow installations.

Waste Line Connection

Proper connection of condensate drain to waste line.

Restrictor Orifice Selection

Refrigerant Line Connections

Electrical Wiring

Electrical Heaters & Operating Controls

Overview of electrical components and factory wiring.

Low Voltage Control Connections

Details for making low voltage control wiring connections.

Install No Heat Kit

Steps for installing the accessory No Heat Kit.

Air Flow Check

Maintenance

Filters

Recommendations for filter inspection and cleaning.

Lubrication

Information regarding blower motor bearing lubrication.

Condensate Drains

Checking condensate drains for proper flow during cooling.

Changing Motor Speed

Instructions to adjust blower motor speed settings.

Sequence Of Operation

Limit Operation

Replacement Parts