ICP EF16J2200A User Manual

INSTA LATION
INSTRUCTIONS
Use ONLY factor'
s
.//
/
/
Models
EF08B1500A1, A2
EF12F1900A
EF16J2200A
EF20N2600A
listed electric heaters.
ECTRIC
With
AMF001NHA
Accessory No Heat Kit
FURNACE
SafetyLabeling and SignalWords
Danger, Warning and Caution
The signal words DANGER, WARNING and CAUTION
are used to identify levels of hazard seriousness. The
signal word DANGER is only used on product labels to
signify an immediate hazard. The signal words WARN-
ING and CAUTION will be used on product labels and
throughout this manual and other manuals that may ap-
ply to the product.
DANGER - Immediate hazards which WILL result in se-
vere personal injury or death.
WARNING - Hazards or unsafe practices which
COULD result in severe personal injury or death.
CAUTION - Hazards or unsafe practices which COULD
result in minor personal injury or product or property
damage.
Safety Labeling and Signal Words Coy
General Information / Installation ............ 2
Vertical Installations ........................ 2
Horizontal Installations ..................... 3
Condensate Drain .......................... 5
Refrigerant Orifice and Lines ................ 5
Electrical Wiring ............................ 6
Checks and Maintenance .................... 7
Blower Performance ........................ 8
Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
The signal word CAUTION is used throughout this
manual in the following manner:
CAUTION
Product Labeling
Signal words are used in combination with colors and/or
pictures on product labels.
Printed in U.S.A. 442 01 2201 02
6-99

ICP EF16J2200A Specifications

General

Brand	ICP
Model	EF16J2200A
Category	Furnace
Language	English

Summary

Safety Labeling and Signal Words

Signal Word Definitions

Defines DANGER, WARNING, and CAUTION signal words used in manuals and on product labels for hazard seriousness.

General Information

Installation Clearances

Specifies physical dimensions and required clearances for safe installation of the electric furnace unit.

Fire Hazard Warning

Alerts users to the fire hazard from improper clearance from combustible materials when heaters are installed.

Installation Configurations

Upflow and Downflow Installations

Covers upflow installation without modification and downflow installations requiring a subbase kit.

Horizontal and Closet Installations

Addresses horizontal airflow installations and closet installations for return air plenum configurations.

Filter Installation

Filter Supply and Placement

Details that filters are field supplied and provides instructions for installing an internal filter, including airflow direction.

Drain and Refrigerant Systems

Condensate Drain Management

Instructions for condensate drains, including special notes for downflow, waste line connections, and pump usage.

Restrictor Orifice and Refrigerant Lines

Covers selecting and changing the restrictor orifice, and connecting refrigerant lines for optimal system performance.

Electrical Wiring and Safety

Electrical Hazard and Wiring Overview

Emphasizes electrical shock hazards, proper grounding, and general wiring practices for installation.

Control and Line Voltage Connections

Details low voltage control connections, transformer tapping, and line voltage wiring for accessories like the No Heat Kit.

Blower Motor and Maintenance

Motor Speed Adjustment and Airflow Check

Guides on changing blower motor speed and performing an airflow check using static pressure measurements.

Routine Maintenance Tasks

Covers filter cleaning, blower motor lubrication, and condensate drain checks for effective unit operation.

Airflow Performance Data

Static Pressure and CFM Tables

Presents tables correlating static pressure, speed, voltage, and CFM for various models and filter sizes to ensure proper airflow.

Operational Sequences and Limits

Sequence of Operation Modes

Details the operational sequences for electric heat, cooling, and heat pump modes based on thermostat inputs and control states.

Temperature Limit and Lockout

Explains the function of the temperature limit switch and the system's response to over-temperature conditions, including lockout states.

Electrical Schematics

Heater and Base Unit Wiring Diagrams

Provides comprehensive wiring diagrams for various electric heater capacities and the base unit, including no-heat kit configurations.

Component Identification

Blower Coil Assembly Parts

Illustrates the blower coil assembly with labeled components, aiding in the identification of parts for replacement or service.

Parts Catalog

Model-Specific Parts List

A detailed list of parts with part numbers and compatibility information for specific furnace models (EF08 to EF20).