ICP H4H430GKD200 - User Manual

428 04 5513 00 March 2010
TECHNICAL SUPPORT MANUAL
Split System Heat Pump
(C,H,T)4H4
DANGER, WARNING, CAUTION, and
NOTE
The signal words DANGER, WARNING, CAU-
TION, and NOTE are used to identify levels of haz-
ard seriousness. The signal word DANGER is only
used on product labels to signify an immediate haz-
ard. The signal words WARNING, CAUTION, and
NOTE will be used on product labels and through-
out this manual and other manuals that may apply
to the product.
DANGER − Immediate hazards which will result in
severe personal injury or death.
WARNING − Hazards or unsafe practices which
could result in severe personal injury or death.
CAUTION − Hazards or unsafe practices which
may result in minor personal injury or product or
property damage.
NOTE − Used to highlight suggestions which will
result in enhanced installation, reliability, or opera-
tion.
Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
The signal word CAUTION is used throughout this
manual in the following manner:
Signal Words on Product Labeling
Signal words are used in combination with colors
and/or pictures on product labels.
WARNING
Safety Labeling and Signal Words
!
!
CAUTION
WARNING
TABLE OF CONTENTS
Wiring Diagrams 2 − 3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Charging Chart 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tech Labels (Expanded Data) 5 − 13. . . . . . . . . . . . . . . .
Cooling Multipying Factors 14 − 18. . . . . . . . . . . . . . . . . .
Heating Multipying Factors 19 − 24. . . . . . . . . . . . . . . . .
Model Number Identification 25. . . . . . . . . . . . . . . . . . . .
MODELS
C4H418GKD200 H4H418GKD200 T4H418GKD200
C4H419GKD100 H4H419GKD100 T4H419GKD100
C4H424GKD200 H4H424GKD200 T4H424GKD200
C4H430GKD200 H4H430GKD200 T4H430GKD200
C4H436GKD200 H4H436GKD200 T4H436GKD200
C4H442GKD200 H4H442GKD200 T4H442GKD200
C4H448GKD200 H4H448GKD200 T4H448GKD200
C4H460GKD300 H4H460GKD300 T4H460GKD300
C4H461GKD100 H4H461GKD100 T4H461GKD100
!
WARNING
PERSONAL INJURY, AND/OR PROPERTY DAM-
AGE HAZARD
Failure to carefully read and follow this warning
could result in equipment malfunction, property
damage, personal injury and/or death.
Installation or repairs made by unqualified per-
sons could result in equipment malfunction, prop-
erty damage, personal injury and/or death.
The information contained in this manual is in-
tended for use by a qualified service technician fa-
miliar with safety procedures and equipped with
the proper tools and test instruments.
Installation must conform with local building
codes and with the National Electrical Code
NFPA70 current edition or Canadian Electrical
Code Part 1 CSA C.22.1.

Summary

Safety Information and Signal Words

Signal Word Definitions and Usage

Defines DANGER, WARNING, CAUTION, NOTE signal words and their usage in manuals and on labels.

General Safety and Hazard Warning

Critical warning regarding personal injury or death from improper installation or repair.

Wiring Diagram and Schematics

Wiring Schematics and Legend

Provides wiring schematics, ladder diagrams, and a legend of component and wire designations.

Important Wiring Notes and Precautions

Lists essential notes and precautions for wiring, installation, and operation of the unit.

R-410 A Charging Chart

Subcooling and Liquid Line Temperature Data

Table providing required subcooling and liquid line temperatures for R-410A charging based on pressure.

Cooling Capacity Adjustment Formulas

Cooling Multiplying Factors Data

Heating Multiplying Factors Data

Cooling Factors for Various Indoor Combinations

Cooling Factors for (C,H,T)4 H418 to (C,H,T)4 H430

Lists cooling multiplying factors for specific indoor/furnace model combinations.

Cooling Factors for (C,H,T)4 H436 to (C,H,T)4 H448

Lists cooling multiplying factors for specific indoor/furnace model combinations.

Cooling Factors for (C,H,T)4 H460 and (C,H,T)4 H461

Lists cooling multiplying factors for specific indoor/furnace model combinations.

Heating Factors for Various Indoor Combinations

Heating Factors for (C,H,T)4 H418 to (C,H,T)4 H430

Lists heating multiplying factors for specific indoor/furnace model combinations.

Heating Factors for (C,H,T)4 H436 to (C,H,T)4 H448

Lists heating multiplying factors for specific indoor/furnace model combinations.

Heating Factors for (C,H,T)4 H460 and (C,H,T)4 H461

Lists heating multiplying factors for specific indoor/furnace model combinations.

Outdoor Unit Model Number Identification Guide

Outdoor Unit Model Number Breakdown

Explains the meaning of each digit position in the outdoor unit model number.

Accessories Part Number Identification Guide

Accessories Part Number Breakdown

Explains the meaning of each digit position in the accessories part number.

ICP H4H430GKD200 Specifications

General

Brand	ICP
Model Number	H4H430GKD200
Phase	1
Refrigerant	R-410A
Voltage	208/230V