ICP HMC018KD User Manual

- 30 -
For the left pipings
3. Route the indoor tubing with the drain hose to the
piping hole as desired position.
4. Insert the pipings, power supply cord and
connecting cable into the piping hole.
IndoorOutdoor
Connecting cable
Piping
To remove the holder,
press the bottom of
chassis near the holder
upward and pull the tab
out of its hole.
Tubing holder
Press

ICP HMC018KD Specifications

General

Brand	ICP
Model	HMC018KD
Category	Heat Pump
Language	English