iCraig CSH307 - Recording and Password Management; Micro SD Card Recording Setup; P2 P Password Change and Reset

19
To record on your micro SD card (Micro SD is not
included)
Change P2P password:
- Default password: 8888 and you may change the password with 4 to 10 digits.
**If you have forgotten the password, press the RESET button on the back of
the device for about 15s.
1. Insert the Micro SD card and format.
2. Choose Record Resolution before
using this feature
3. Choose File Length to set your
recording time
4. Tap “OK” to enable recording