iCraig CSH307 User Manual

1

iCraig CSH307 Specifications

General

Motion Detection	Yes
Night Vision	Yes
Storage	MicroSD card
Connectivity	Wi-Fi
Resolution	720p

Summary

Important Safety Instructions

Electrical and Environmental Safety

Warnings about fire, electric shock, moisture, and FCC compliance.

Safety Precautions and Usage

General Usage Guidelines

Instructions on water proximity, cleaning, ventilation, and heat sources.

Plug, Cord, and Accessory Safety

Advanced Safety Guidelines

Overloading and Outdoor Antenna Safety

Warnings on overloading, liquid entry, and proper grounding for antennas.

Service and Damage Precautions

Getting Started

Location of Camera Controls

Identifies physical controls and ports on the iCraig Camera.

Initial Setup Requirements

Initial Setup Procedures

Connecting Power and Downloading App

Camera Connection Modes

Understanding LED Status

Access Point (AP) Mode Setup

Details on connecting the IP camera in Access Point (AP) mode.

Method 1: Connection without QR Scan

LAN Search for Device

Procedure for connecting the camera via LAN search within the app.

Connecting to Home Wi-Fi Network

Configuring Wi-Fi Settings

Steps to access advanced settings and configure Wi-Fi for home network.

Wi-Fi Credential Entry

Entering SSID and Password

Instructions for inputting SSID and password for home network connection.

Device Reboot and Status Check

Method 2: Connection by QR Code Scan

Initiating Wi-Fi Setup

Starting the device setup process via Wi-Fi connection using the app.

QR Code Scan Procedure

Scanning Camera QR Code

Finalizing Device Connection

Adding and Verifying Device

Advanced Settings Configuration

Motion Detection Setup

Setting up motion detection sensitivity and PIR sensor activation.

Recording and Password Management

Micro SD Card Recording Setup

P2P Password Change and Reset

Installation and Troubleshooting

Troubleshooting Connectivity Issues