iCraig CSH307 - Camera Connection Modes; Understanding LED Status; Access Point (AP) Mode Setup

To Next Page

To Previous Page

After installing your app, open the APP, press and to choose “Add new online

Camera”icon to activate the APP.

4.Check your iCraig cam LED lights which indicate the status as below:

Blue LED Light “Slow Flash” ==== Ready for new connection mode.

Blue LED light “Fast Flash”=== In progress for connection

Blue LED light “Solid blue live”=== connected.

3. Connect IP Camera at AP (Access Point) Mode

There are two methods to setup your iCraig IP camera – connection without

QR scan and connection by UID (QR Code) scan. Both methods require

connect your smartphone with IP camera at AP (Access Point) mode. See

below:

When the iCraig Cam Blue LED light is flashing slowly, Go to “Settings -----> Choose

“Wi-Fi” on your Smart Phone or tablet to look for the wifi name similar to “

PQXXXXX_XXXXXXXXXXXX_XXXXXX”