ICS 890 Series - Technical Specifications

© 2014 ICS, Blount International Inc. Specications are subject to change without notice. REV021414 F/N 566100
890 SERIES OPERATOR’S MANUAL
7
TECHNICAL SPECIFICATIONS
890 Series
8 gpm (30 lpm)
890 Series
12 gpm (45 lpm)
Weight w/out bar and
chain (1' hose whips)
23.5 lbs (10.6 kg)
Length 23 inches (58.5 cm)
Height 10.5 inches (26.5 cm)
Width 9.5 inches (24 cm)
Hydraulic Supply
8 gpm (30 lpm) @
2,500 psi (172.5 bar)
12 gpm (45 lpm) @
2,500 psi (172.5 bar)
Hydraulic Fluid
Requirements (Type)
Mobil DTE 13M or equivalent
Water Pressure Minimum: 20 psi (1.5 bar)
Water Flow 1 gpm (4 lpm) minimum
Operating Speed
6,100 rpm (avg. free running)
5,500 sfm (avg. free running chain)
6,500 rpm (avg. free running)
5,800 sfm (avg. free running chain)
Noise Level
(Sound Pressure Level)
98 dB @ 3 ft (1 m)
Noise Level
(Sound Power Level)
107 dB @ 3 ft (1 m)
Vibration
2.0 m/sec
2
(Front Handle)
6.0 m/sec
2
(Rear Handle)
Torque 122 in-lbs (13.8 Nm) 170 in-lbs (19.2 Nm)
Horsepower 11.5 hp (8.6 kW) 17.5 hp (13 kW)
*Product data shown is rated based on maximum input conditions and efficiency
assumptions and may vary dependent on power supply.