© 2014 ICS, Blount International Inc. Specications are subject to change without notice. REV021414 F/N 566100
890 SERIES OPERATOR’S MANUAL
9
STEP 5
Make sure all of the drive links are
inside the bar groove, then
pre-tension the chain.
SET-UP
GUIDE BAR AND DIAMOND CHAIN INSTALLATION
STEP 6
Install the bar clamp plate over the
bar studs.
STEP 7
Install the side cover over the bar
studs and install side cover nuts.
Finger tighten only.
To Next Page
Loading...
