Set the switch to „ON“ and select „OK“ to change the Camera ID.
Photo, Photo & Video, Video
1) Switch the „Camera/Video Switch" to the Picture Icon to enable Photo
Mode or to enable Photo-and Video Mode.
2) Select “Photo & Video”, camera shoots photo(s) first, then video upon
same trigger event based on Video Length and Multi-shot user
configured.
3) Switch the „Camera /Video Switch" to the Video Icon -> Video
Recording Mode
5MP (2560*1920), 8MP (3264*2448), 12MP (4000*3000)
1) Min. Blur: Short exposure time to minimize motion blur for better
image quality; shortened IR flash range;
2) Balanced: combination of above 2 options;
3) Max. Range: Longer exposure time to extend IR flash range for better
night vision; lower image quality;
Programmable 1~5 photos per trigger
1920*1080, 1280*720, 640*480
To Next Page
Loading...