3
quality of batteries, and using environment, etc; we’re not able to list out exact number of
photos and videos that camera can achieve.
Power Adaptor—Security Surveillance Purpose
This camera can also be powered by an external 12V/ 1~2A DC adapter. Recommend to remove
the AA size batteries when power adapter is used. Electrical power is recommended for security
purposes.
1.4. SD Card Selection
Using a memory card is required to operate the camera. The camera accepts SD-cartswith a
maximum capacity of 32 GB. Before inserting or removing the memory card, the camera must
be switched "OFF". Failing to do so may cause loss of or damage the pictures. When the SD card
is full, the viewing screen indicates "Memory Full". The following data shows an approximate
quantity of photos which can be recorded by the camera depending on the memory card
capacity. Please check to see which size card can fit your needs best.
1.5. USB Connection
When camera is connected via USB cable; screen display “MSDC”, press “Menu” once, “MSDC”
turns to “PC Cam”, camera now can be used as a PC camera; press “Menu” again, camera exits
PC camera mode.
1.6. Attention
1. Please do not change SD card, batteries or plug in or out power supply, when the camera
is switched on. This could lead to an entire deletion of all system data.
To Next Page
Loading...