Standard: Unlimited;
Optional: 1~99
e.g.: when 50 is selected, the camera sends up to 50 photos a day. All other
photos will be stored on the SD card only.
Photo request by SMS command via APP: $03*1$
Switched OFF: „PIR only“
Switched ON: „always active“ !! HIGHER POWER CONSUMPTION!
Note: Please adjust camera date/time to ensure some functions work as
expected.
Imprints of programmed camera ID, moon phase, temperature, date, and
time on photo.
Alkali batteries / rechargeble batteries
Choose whether batteries or rechargeable batteries are used in camera. This
makes the camera perform better.
50HZ, 60HZ; (when using TV out)
improper setting may cause camera screen flicker.
Select “ON”, press “OK”, camera will continue to record photos/videos by
deleting/overwriting the oldest photos and/or video clips.
Select “ON”, press “OK”, to enable password protection for your camera;
support totally 6 digits/ alphabets long password access.
Firmware Version of the camera.
To Next Page
Loading...