V SERIES USER’S MANUAL
3
6.4.4 Speed and Knife Force Setting………………………………………………………24
6.4.5 Knife drop/raise Test………………………………………………………………...25
6.4.6 Test Rectangle Cutting Operation…………………………………………………...25
6.4.7 Pause Button Operation……………………………………………………………...26
6.4.8 Online-change Speed and Knife Force Operation…………………………………...26
6.4.9 Repeat Function……………………………………………………………………...27
Chapter Seven Troubleshooting
Troubleshooting…………………………………………………………………………...28
Chapter Eight Appendix
Appendix 1
Drive setting……………………………………………………………………………….31
Appendix 2
Vinyl cutter software setting……….………………………………………………………32
To Next Page
Loading...
