Driver Installation
Follow the provided prompts to complete the driver installation.
For the Windows system, the “Add New Hardware Wizard” will open
automatically. Insert the installation CD included in the package, navigate to and
open the installation file.
For Mac OS, insert the installation CD and locate the Mac driver installation file.
Follow the provided instructions to complete the driver installation.
Please refer to User’s Manual under eSATA Host Card section on our
website.
Verify Driver Installation
Mac OS:
If a driver installation failure error message appears after restarting the
computer, follow the recommendations provided in the error message.
Windows OS:
1. Right-click the My Computer icon on your desktop and choose Manage from
the pop-up menu.
2. Double-click Device Manager.
3. Double-click SCSI and RAID controllers.
4. Verify that the SiI 3132 SATALink Controller appears, as shown below.
To Next Page
Loading...
Need help?
General
