2.4 CBDX – Rear side of unit
The rear side hosts electrical connectors that can be utilized by the user.
Note This unit contains a fan for forced air cooling. The inlet and outlet are slits located at
the sides of the unit. Never block these areas to avoid overheating and failure of the
unit.
2.4.1 Power socket
Electrical power is supplied using a VDE 0625, EN 60 320, C13 type electrical connector. Only
use the supplied cable or an identical cable that conforms to the aforementioned standard to
connect to the unit. The unit automatically adapts to local power line specifications within the
range printed on the unit.
To Next Page
Loading...
