Ideal Boilers icos HE12

Need help?

Do you have a question about the Ideal Boilers icos HE12 and is the answer not in the manual?

Summary

Legal requirements for installation by Gas Safe Registered Engineers and RGII in IE.

Information on the required voltage, frequency, and fusing for the appliance.

Crucial safety and usage guidelines, including casing, storage, and component tampering.

Specifies limitations on use for individuals with reduced capabilities and advises child supervision.

Required space around the boiler for servicing and ventilation.

Step-by-step instructions for safely lighting the boiler.

Explanation of normal operation and display codes for the boiler.

Guidance on protecting the boiler from frost during absence.

Identification and function of the boiler's control components.

Instructions for turning off the boiler for short and long periods.

Steps to restart the boiler after a shutdown.

Function of the overheat thermostat and fault code 'L' 'A'.

Information on flame failure, fault code L-F, and restart procedure.

Instructions regarding the condensate drain and potential blockages.

Procedure to follow if a gas leak is suspected.

Common problems and solutions not directly related to boiler failure.

Methods for cleaning the boiler using dry or damp cloths.

Recommendation for annual servicing by a qualified engineer.

General

Boiler Type	Condensing
Fuel Type	Natural Gas
Dimensions (HxWxD)	700x395x278 mm
Weight	28.8 kg
Central Heating Max Output	12.1 kW
Mounting	Wall-mounted
ErP Space Heating Efficiency Class	A
NOx Class	5
Central Heating Flow Temperature Range	30-80°C
Max Operating Pressure	3 bar
Warranty	2 Years
Output	12.1 kW
CH Output (kW)	12.1