To Next PageTo Next Page
Need help?Do you have a question about the Ideal Boilers i 30 and is the answer not in the manual?
Lists amendments to installation and user guide sections including water treatment, electrical, commissioning, and flowchart updates.
Details central heating, DHW output, standard features, and optional extra kits for the boiler.
Covers gas safety, building regulations, electrical safety, and boiler location requirements.
Details consultation with gas suppliers, meter requirements, and pipework sizing.
Provides guidance on terminal placement and minimum spacing requirements.
Covers electrical safety, wiring, and condensate drain installation requirements.
Specifies minimum clearances required for boiler installation and servicing.
Details procedures for system balancing, including radiator valve adjustments.
Provides recommendations for water treatment in central heating and DHW systems.
Lists the contents of the hardware and fixing packs included with the boiler.
Instructions for cutting and setting flue lengths for various terminal types.
Step-by-step guide for fitting the flue terminal through the wall.
Instructions for correctly fitting the flue turret onto the appliance manifold.
Details the components included in the roof flue kit options.
Specifies minimum dimensions for flue terminal positioning relative to openings.
Covers condensate pump usage and external drain connection requirements.
Step-by-step instructions for filling the central heating and DHW systems.
Details internal wiring for thermostats and external electrical control connections.
Procedure for checking the gas inlet pressure during commissioning.
Explains boiler status display codes and operation modes like CH and DHW.
Verification steps for domestic hot water and central heating operation.
Explains boiler operation, user responsibilities, and the need for regular servicing.
Details checks for combustion performance using a flue gas analyser.
Procedure for removing and cleaning the fan and venturi assembly.
Instructions for cleaning the condensate trap or siphon.
Steps for reassembling the boiler components after cleaning.
Detailed procedure for replacing the boiler's fan unit.
Procedure for replacing the condensate trap/siphon.
Instructions for replacing the mechanical 24-hour timer.
Covers replacement of sensors, pressure gauges, and safety valves.
Procedure for replacing the pump's automatic air vent.
Instructions for replacing the DHW plate heat exchanger.
Procedure for replacing the central heating water pressure switch.
Guide for cleaning or replacing the DHW filter and flow regulator.
Instructions for renewing the heat engine assembly.
Procedure for replacing the boiler sealing panel seal.
Troubleshooting steps for a boiler with no display on the control panel.
Information on ordering spare parts, including required details.
Guidelines for installers on standards of work and customer interaction.
Details requirements for boiler installation, guarantee, and annual servicing.
Sections of the checklist for controls, systems, and operational data.
Information and steps prior to performing CO level and combustion ratio checks.
Instructions for lighting the boiler and performing a reset.
Explains how to control DHW and CH temperatures, and use weather compensation.
Guidance on condensate drain, freezing prevention, and general maintenance.
Instructions for programming the 24-hour mechanical timer.
A guide to diagnosing and resolving common boiler issues.
Explains the meaning of boiler status display codes.
Lists fault codes, their descriptions, and recommended actions.
General| Brand | Ideal Boilers |
|---|---|
| Model | i 30 |
| Category | Boiler |
| Language | English |
