Need help?Do you have a question about the Ideal Boilers Atlantic 30 and is the answer not in the manual?
Covers gas safety regulations, installation requirements, and standards.
Provides guidance on installing the flue system and terminal positions.
Details essential safety precautions for handling the boiler.
Step-by-step guide for fitting the flue through the wall and its components.
Step-by-step guide for commissioning and testing the boiler installation.
Explains how to determine the correct flue length and select required packs.
Overview of fault codes and corresponding troubleshooting sections.
Troubleshooting steps for flow thermistor faults.
Troubleshooting steps for outside sensor faults.
Troubleshooting steps for overheat lockout faults.
Troubleshooting steps for return thermistor faults.
Troubleshooting steps for flame loss faults.
A checklist for boiler installation and commissioning.
Flowchart for CO level and combustion ratio checks.
General| Model | Atlantic 30 |
|---|---|
| Category | Boiler |
| Mounting | Wall Mounted |
| ERP Rating | A |
| CH Output (kW) | 30 |
| DHW Output (kW) | 30 |
| Output | 30 kW |
| Hot Water Flow Rate | 12.4 l/min |
| Fuel | Natural Gas |
| Dimensions (H x W x D) | 700mm x 400mm x 300mm |
| Boiler Type | Combination |
To Next Page