IDEAL 5255 - Operation (Cutting by Markings); Cutting Using Visual Markings

- 23 -
1
6
4
5
7
2
1
3
9
8
8
10
T
Memory
1
MANUAL
•
Operation
• •
Cut according to markings
Press MANUAL
• Adjust the backgauge with the hand-
wheel
E
to the back.
• Insert paper and move by means of
the stacking angle
I
to the back-
gauge
G
and side lay on the left
H.
• Turn the hand-wheel
E
to the right
until the marking on the paper to be
cut is below the cutting line indicator.
• The further the hand-wheel
E
is turned to the right, the quicker the
backgauge moves. If the hand-wheel
is turned to the left the backgauge
will return quicker.
• Close the safety guard
I
.
• Release the cut.
   
MANUAL  
()   
.   E  
•
    
J  
G  
H   
•
E    
  ,  
    
.
•
E     
      
)(
       
  
.  (    )
•
.I   
•
.   
•