IDEAL 5255 - Operation (Program Examples - Continuation); Implementing Eject Function

- 34 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
T
MANUAL
T
MANUAL
•
Operation
• •
Eject function program
• If a short measurement e.g. 30 cm and then
a long measurement e.g. 40 cm is cut at the
start of a program then it is wise to insert an
EJECT
S
after the rst cut so that the paper
is pushed to the front.
• The EJECT function can be added each time
a measurement is entered and ejects before
advancing to the next measurement. When
the eject function is programmed an "E"
S
appears top right in the display.
• Inserting an Eject function subsequently in
the program. Select a program and advance
to the step to be changed with the arrow keys
b
and
j.
Enter the new measurement and
before activating the enter button
press
EJECT
N
.
Example of a program eject function
• Press PRG. EDIT .
• Enter program number e.g. 08.
• Press Enter .
• 1. Enter program Step e.g. 30 cm.
• Press Enter .
• 2. Enter program Step e.g. 40 cm.
Press EJECT and with Enter
store the
dimension.