- 42 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
28.
.) (
(A )
.
•
)
(
.
•
) (
•
.
! ! X
.) (
•
•
.(A)
. ¼
(
(A
.
•
)
(
.
•
) (
•
.
! ! X
•
•
.(A)
•
Blade and cutting stick replacement
•
•
Replacing the cutting stick (not the blade).
• Turn the blade adjusting screw (A) to the
left until it stops. (Otherwise the rst cut will
be too deep).
• Remove the cutting stick according to top
picture.
• Turn the cutting stick (the non-used side
must be near to the blade) and plug it into
the holding bolt.
Danger! Risk of injury!
Cutting test after replacing the cutting
stick (not the blade)
• Insert the paper and release the cut.
• If the last sheet of paper is not cut along
the entire length turn the blade adjusting
screw (A) ¼ turn to the right.
• If the last sheet is still not completely cut
repeat this process until the last sheet is
cut along the entire length.
To Next Page
Loading...
