IDEAL 5255 - Possible Malfunctions (Display and Motor); Motor Operation Without Blade Movement

- 54 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
A
C
B
Display illumination off
• Machine is plugged in? (A)
• Main switch on position "I"? (B)
• Push in the safety button! (C)
• Check the units fuse and the on-site circuit
breaker!
After 30 minutes the screen switches to
energy-saving mode.
The screen is reactivated by touching the
keypad area
L
.
Motor runs but blade does not move
downwards.
• Security brake has been activated!
Inform the Service Team!
None of the above mentioned methods
helped to solve the problem:
Contact Service Team under
• www.ideal.de  "Service"
service@krug-priester.com
35.
:
   
A =  
B =  
C =   
36.
A
C
B
    30 
.    
   
.L 
37.
IDEAL
"Service"
      
   !
!  
•
     
:  
 : 
•
www.ideal.de

"Service"
service@krug-priester.com
37.
IDEAL
"Service"
      
   !
!  
•






:  
 : 
•
www.ideal.de

"Service"
service@krug-priester.com
• www.ideal.de  "Service"
service@krug-priester.com
•
Possible malfuntions • •
IDEAL
"Service"