- 23 -
P R
OS
T
W
YXZ
• Operation •
Eject function
If EJECT
R is pressed instead of START P,
after inserting the measurement
O, the
backgauge will advance forwards so that
paper can be removed. Finally the backgauge
moves to the last setting.
Multiple cut
• Enter the start dimension on the display O
• Advance to the measurement with the
START
P
• Push the paper to the backgauge
• Press multiple cut T
• Multiple cut sign appears top left together
with the value 00.00
S
• Enter multiple cut measurement (appears in
red letters)
• Press START the backgauge advances
by the multiple cut size
• This is repeated everytime a cut is activated.
Exiting program-mode
• Press multiple cut T (yellow).
Multiple cut sign and value are deleted.
Calculator function
X
• Calculate the desired measurement,
e.g. 40 - 2 =
Y
Z
and
the backgauge advances immediately to 38.
To Next Page
Loading...
