IDEAL 7260 - Blade and Cutting Stick Replacement; When Cutting Quality Decreases

- 28 -
If the cutting quality decreases:
• Check the cutting depth (see page 36).
• Check the cutting stick (see page 32).
• Replace or grind the blade
(see page 28 - 36).
The blade cannot be ground if the blade
height is less than 8,3 cm / 3,29 inches.
A new blade must be used.
The blade may only be ground by a qualied
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only
be performed by trained staff.
• Blade and cutting stick replacement •