-1- -2- -3- -4-
-5- -6- -7- -8- -9-
indicator lights will be lit on the LED display.
To save power, when you have finished please turn off the power station by pressing
and holding the power button for 3 seconds.
Warning:
Port type and voltage standards vary depending on the country. Please make sure
the voltage and port used are compatible with the appliance standards.
How to use the power station to charge USB devices?
Connect the USB cable to one of the power stations USB ports. The power station will
automatically turn on and supply power to the USB port. The USB and OUT indicator
lights will be lit on the LED display.
USB Type-C Power Delivery, this port is compatible with USB PD devices. The USB
Type-C port can be used to power PD compatible devices at up to 60W.
The Type-C and OUT indicator lights will be lit on the LED display.
USB 3(QC) is compatible with quick charge devices providing faster charging at 5V/2.4A;
9V/2A; 10V-12V/1.5A
To save power, when you have finished please turn off the power station by pressing
and holding the power switch for 3 seconds.
How to use the LED flashlight
The LED flashlight has 3 modes, On, SOS, and Strobe.
a. Turn on
To turn on the LED flashlight press the power button.
b. Change light modes
To cycle between the different lighting modes press the power button.
(On/SOS/Strobe/Off)
c. To turn off
To turn off the LED light press the power button for three seconds.
To Next Page